Rear Cross Panel Trim

Rear Cross Panel Trim

Special tools, testers and auxiliary items required

• Pry lever (80 - 200)

Removing






- Lift the luggage compartment floor covering at the handle and fold it forward.

- Remove the replacement part and the spare wheel well cover.

- Remove the bolts - 1 - and - 4 -.

- Remove the rear lid seal - 2 - near the rear lid end panel trim panel.

- Unclip rear cross panel trim - 3 - upward vertically using a pry lever (80 - 200) - arrows -.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Rear Lid End Panel Trim Panel Assembly Overview ] Rear Lid End Panel Trim Panel Assembly Overview.