C-Pillar Triangle Trim

C-Pillar Triangle Trim

Removing






- Remove the window frame trim..

- Pry out the grommet - 1 -.

- Remove the bolt - 2 -.

- Push the C-pillar triangular trim - 1 - downward - arrow -. While doing this, the tab - 2 - will disengage from the window seal - 3 - and the pin - 4 - will disengage from the body - 5 -.






- Remove the C-pillar triangle trim upward and out of the door opening.

Installing

• For the correct tightening specifications, refer to => [ Rear Door Window Shaft Strip, B-Pillar Trim, C-Pillar Triangle Trim ] Rear Door Window Shaft Strip, B-Pillar Trim, C-Pillar Triangle Trim.

Install in reverse order of removal. Note the following:

- Install the window frame trim..