Rear Center Armrest Assembly Overview

Rear Center Armrest Assembly Overview






1 Split rear seat backrest, 2/3 right

• Without pass-through opening

• Vehicles with

2 Center armrest bracket

• With hinges

• Removing and Installing, refer to => [ Center Armrest Bracket with Hinges for Divided Rear Seat Backrest ] Center Armrest Bracket With Hinges For Divided Rear Seat Backrest

3 Cover

• Clipped into the trim for the center armrest

• Removing and Installing, refer to => [ Divided Rear Seat Backrest Center Armrest Trim ] Divided Rear Seat Backrest Center Armrest Trim

• Press on until it engages audibly

4 Screws

• quantity: 4

• Self-locking

• Replacing

• Threaded holes for screws must be cleaned, for example, with thread cutter

• 11 Nm

5 Bolt

• 4 Nm

6 Trim

• For center armrest

• Removing and Installing, refer to => [ Divided Rear Seat Backrest Center Armrest Trim ] Divided Rear Seat Backrest Center Armrest Trim

• Install and press on it until it audibly latches

7 Trim

• For center armrest

• Removing and Installing, refer to => [ Center Armrest Trim for Divided Rear Seat Backrest ] Center Armrest Trim For Divided Rear Seat Backrest

• Check the hook for damage and replace if damaged

• Install and press on it until it audibly latches

8 Rear Center Armrest

• Removing and Installing, refer to => [ Rear Center Armrest ] Rear Center Armrest

9 Bolt

• 0.9 Nm

10 Bolt

• 4 Nm

11 Rivet

• Rivet using special pop rivet pliers (V.A.G 1753A)

12 Nuts

• Quantity: 2

• Self-locking

• Replacing

• 8 Nm