Steering Column Switch Module Upper Trim

Steering Column Switch Module Upper Trim

Removing






- Move the steering wheel as far down as possible.

- Carefully unclip the cover - 1 - from the top of the steering column switch module- 2 - using a small flat blade screwdriver - arrow A -.

- Turn the steering wheel counterclockwise 90° from the straight position.

- Carefully pry the upper trim off the lower trim using a small flat blade screwdriver - arrow B -.

- Turn the steering wheel back 180° and repeat the procedure on the opposite side - arrow C -.

- Disengage the upper steering column switch module trim from the lower trim and remove it.

Installation






Install in reverse order of removal. Note the following:

- Engage the upper trim - 1 - in the lower trim - A arrows -.

- Ensure the lower trim pins engage in the opening at the upper trim retaining tab - B arrows -.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Steering Column Switch Module Trim Assembly Overview ] Steering Column Switch Module Trim Assembly Overview.