Sill and Tunnel Side Front Trim Assembly Overview

Sill and Tunnel Side Front Trim Assembly Overview






1 front trim

• Removing and Installing, refer to => [ Sill Side Trim with Front Trim ] Sill Side Trim With Front Trim

2 Bracket

• For front trim, compressor and multi-contour seat control module

• Removing and Installing, refer to => [ Front Trim Bracket, Compressor and Multi-contour Seat Control Module ] Front Trim Bracket, Compressor and Multi-Contour Seat Control Module

• To replace, install the compressor for the multi-contour seat into the new bracket

3 Expanding rivet

4 Bolt

• Threaded hole for screws must be cleaned, for example, with thread cutter

• Install with locking compound; locking compound refer to the => Parts Catalog

• 6.5 Nm

5 Tunnel side trim

• Removing and Installing, refer to => [ Tunnel Side Trim ] Tunnel Side Trim

6 Front seat

7 Bracket

• For sill side trim

• Removing and Installing, refer to => [ Sill-Side Trim Bracket ] Sill-Side Trim Bracket

8 Bolt

• Quantity: 2

• 8 Nm

9 Sill-side trim

• Removing and Installing, refer to => [ Sill Side Trim with Front Trim ] Sill Side Trim With Front Trim

• Lock into the bracket and to the trim

10 Bolt

• Quantity: 2

• Threaded holes for screws must be cleaned, for example, with thread cutter

• Install with locking compound; locking compound refer to Parts Catalog.

• 3.5 Nm