Module Carrier With Air Cushions For Lumbar Support Assembly Overview
Module Carrier with Air Cushions for Lumbar Support Assembly Overview
1 Bolt
• Quantity: 2
• 2.5 Nm
2 Air cushion for the lumbar support
• Removing and Installing, refer to => [ Air Cushion for Lumbar Support ] Air Cushion For Lumbar Support
• Connect the pneumatic lines. Refer to => [ Disconnecting and Connecting Pneumatic Lines ] Disconnecting and Connecting Pneumatic Lines
3 Expanding rivet
• Quantity: 4
4 Module carrier
• Removing and Installing, refer to => [ Module Carrier ] Module Carrier
5 Rubber buffer
• Solenoid valve block mount
• Quantity: 4
6 Valve block 1 in the left rear seat (N479)
• Front passenger side: valve block 1 in passenger side rear seat (N481)
• For the correct allocation, refer to => Parts Catalog
• Removing and Installing, refer to => [ Valve Block 1 in Driver Side Rear Seat N479/Valve Block 1 in Passenger Side Rear Seat N481 ] Valve Block 1 In Driver Side Rear Seat N479/Valve Block 1 In Passenger Side Rear Seat N481
• Connect the pneumatic lines. Refer to => [ Disconnecting and Connecting Pneumatic Lines ] Disconnecting and Connecting Pneumatic Lines
7 Seat frame