Backrest Cover and Backrest Cushion, Separating and Connecting - Multi-Contour Seat

Backrest Cover and Backrest Cushion, Separating and Connecting - Multi-contour Seat

Special tools, testers and auxiliary items required

• Upholstery clip pliers (V.A.G 1634)

Removing






- Remove backrest cover and backrest cushion. Refer to => [ Backrest Cover with Backrest Cushion - Multi-contour Seat ] Backrest Cover With Backrest Cushion - Multi-Contour Seat.

- Pull off backrest cover - 2 - from the backrest cushion - 1 - as far as possible and cut upholstery clips - 3 - using pliers - 4 -.

- Vehicles with backrest heating: disconnect the connector

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Backrest Cover and Backrest Cushion Assembly Overview - Multi-contour Seat ] Backrest Cover and Backrest Cushion Assembly Overview - Multi-Contour Seat.