Multi-Contour Seat Backrest Cover and Backrest Cushion, Separating and Connecting

Multi-contour Seat Backrest Cover and Backrest Cushion, Separating and Connecting

Special tools, testers and auxiliary items required

• Upholstery clip pliers (V.A.G 1634)

Removing






- Remove the backrest cover and backrest cushion for the multi-contour seat. Refer to => [ Multi-contour Seat Backrest Cover with Backrest Cushion ] Multi-Contour Seat Backrest Cover With Backrest Cushion.

- Pull off backrest cover - 3 - from the backrest cushion - 2 - as far as possible and cut upholstery clips - 1 - using pliers.

- Backrest cover with heating element sewn in: carefully loosen the heating element from the bonding and remove it.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Backrest Cover and Backrest Cushion Assembly Overview - Multi-contour Seat ] Backrest Cover and Backrest Cushion Assembly Overview - Multi-Contour Seat.