Fuel Tank Leak Detection Control Module (J909)

Fuel Tank Leak Detection Control Module (J909)

Removing






- Follow all safety precautions. Refer to => [ Safety Precautions ] Fuel Supply System.

- Follow the guidelines for clean working conditions. Refer to => [ Clean Working Conditions ] Fuel Supply System.

- Remove the left rear underbody panel.

- Remove the Evaporative Emission (EVAP) canister. Refer to => [ EVAP Canister ] Service and Repair.

- Loosen the clamp and remove the vent line - 2 -.

- Remove the bolts - 1 -.

- The fuel tank leak detection control module - 3 - from the EVAP canister - arrow -.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ EVAP Canister System Overview ] EVAP Canister System Overview.

- Install the EVAP canister. Refer to => [ EVAP Canister ] Service and Repair.

- Install the left rear underbody panel.