Converter With Socket, 12 V-115 V (U27)

Converter With Socket, 12 V-115 V (U27)

Removing






- Remove the rear center console cover.

- Release the tabs - 3, 6 - and free up the connectors - 4, 5 - on the mount.

- Remove the bolts - arrows -.

- Remove the converter with socket, 12 V-115 V (U27) - 2 - from the mount.

- Free up the wiring harness from the mount - 1 -.

- Remove the mount - 1 - from the rear cover - 2 - and then remove - arrow B - it from the pivot bearing - arrow A -.






- Release the tabs - 3, 4 - and simultaneously remove the mounts - 1, 6 -.






- Remove the cover - 2 - from the mount - 5 - - arrow -.

- Free up the USB-charger - 5 -.






- Release the tabs - 2 - and the open the tabs - 7 -.

- Remove the 115-Volt-socket - 6 - from the cover - 1 -.

- Remove the 115-Volt-socket and the USB-charger through the opening in the rear cover - 3 -.

- Remove the converter - 4 - with the 115-Volt-socket and the USB-charger.

Installing

• Tightening specification, refer to => [ Cigarette Lighter, 12V Outlets Overview ] Cigarette Lighter, 12V Outlets Overview.

Install in reverse order of removal. Note the following:

- Install the rear center console cover.