Relay and Fuse Panel On Right of Luggage Compartment

Relay and Fuse Panel On Right Of Luggage Compartment

Removing






- Turn off the ignition and disconnect the ground cable from the battery. Refer to => [ Battery, Disconnecting and Connecting ] Service and Repair.

- Remove the right luggage compartment trim panel..

- Remove the nut - 3 -.

- Cut the cable tie - 4 - and free up the wiring harness - 5 -.

- Remove relay and fuse panel F - 2 - from the body - 1 - - arrows -.

- Remove the mount for the 46-pin connector (T46b). Refer to => [ 46-Pin Connector Mount ] 46-Pin Connector Mount.






- Open the clip in - direction of arrow - and remove the fuse panel - 2 - from relay and fuse panel F - 1 -.

- Release the retainers - arrows - and remove the relay panel - 2 - from the relay/fuse panel - 1 - to the rear.






- Remove the relay and fuse panel F.

• Check the exact connector assignment in the current wiring diagram.

Installing

• Tightening specification, refer to=> [ Luggage Compartment Relay, Fuse Carrier and Control Modules Overview ] Luggage Compartment Relay, Fuse Carrier and Control Modules Overview.

Install in reverse order of removal. Note the following:

- Install the mount for the 46-pin connector (T46b). Refer to => [ 46-Pin Connector Mount ] 46-Pin Connector Mount.

- Connect the battery. Required actions, refer to=> [ Connecting ] Service and Repair.