Suppressor (C24)

Suppressor (C24)

Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Service Precautions.

Removing






- Remove the relay panel and fuse panel and move them to the side with the relay and fuse panels still connected. Refer to => [ Relay and Fuse Panel in Plenum Chamber E-Box ] Relay and Fuse Panel In Plenum Chamber E-Box.

- Disconnect the electrical connector - 2 -.

- Remove the suppressor - 1 -.

Installing

Install in reverse order of removal. Note the following:

- Install the relay panel and fuse panel. Refer to => [ Relay and Fuse Panel in Plenum Chamber E-Box ] Relay and Fuse Panel In Plenum Chamber E-Box.