Battery Jump Start Terminal Mount

Battery Jump Start Terminal Mount

Removal






- Remove the plenum chamber cover.

- Remove the foam wedge - arrow - upward.

- Unlock and remove the cover - 4 - - arrows -.






- Cut the cable ties - 1, 3 and 5 -.

- Remove the bolts - 2 and 6 -.

- Unlock the cover - 5 - and move it to the side.






- Open the tabs - 1 - and - 3 - and remove the positive terminal grip - 2 - from the bracket.

- Pull the mount - 4 - forward and swivel it out in - direction of arrow -.

Installation

• Tightening specifications, refer to => [ Battery Jump Start Terminal and Positive Terminal Grip Overview ] Battery Jump Start Terminal and Positive Terminal Grip Overview.

Install in reverse order of removal, observing the following:

• When installing, install cable ties at same location.

- Install the plenum chamber cover.