Pulley, Preparation for Replacing

Pulley, Preparation for Replacing

- Switch off the ignition.

- Remove front noise insulation.

- Mark the direction of the operation of the ribbed belt (always refer to the Repair information for the routing of the ribbed belt for each engine).

- Release the tension on the ribbed belt and then remove it.

• Mark direction of rotation of ribbed belt using chalk or felt-tip marker before removing. Running a used belt in the opposite direction could destroy it.

• => [ A/C Compressor Belt Pulley - Version 1 ] A/C Compressor Belt Pulley - Version 1

• => [ Belt Pulley From A/C Compressor - Version 1 ] Belt Pulley From A/C Compressor - Version 1

• => [ A/C Compressor Belt Pulley - Version 2 ] A/C Compressor Belt Pulley - Version 2

• => [ Belt Pulley From A/C Compressor Version 2 ] Belt Pulley From A/C Compressor Version 2