Seat Occupied Recognition Assembly Overview
Seat Occupied Recognition Assembly Overview
The replacement part (service kit) for the passenger occupant detection system is already precalibrated and must not be separated under any circumstances. The service kit consists of:
• Passive Occupant Detection System Control Module -J706
• Passive Occupant Detection System Pressure Sensor -G452
• Passive Occupant Detection System Mat
• Seat cushion
• Wiring harness between the passenger occupant detection system control module -J706 and passenger occupant detection system pressure sensor -G452.
Follow all safety precautions when working on the passenger occupant detection system. Refer to => [ Passenger Occupant Detection System Deactivation Additional Safety Precautions ] Passenger Occupant Detection System Deactivation Additional Safety Precautions.
• The passenger occupant detection system is only installed in the front passenger seat.
1 Seat Occupied Recognition Pressure Sensor (G452)
• Is part of the seat occupied recognition mat - 6 -
• Removing and Installing, refer to => [ Passenger Occupant Detection System ] Passenger Occupant Detection System
Do not disconnect the electrical connector.
2 Seat Pan
3 Clip
• Quantity: 2
4 Cushion
• For the lower seat frame
• Do not separate from the seat occupied recognition mat - 6 -
5 Clip
• Do not release.
6 Mat
• For the passenger occupant detection system
• Is a component with the seat occupied recognition pressure sensor (G452)
• Must not be separated from the lower seat frame cushion - 4 -
• Removing and Installing, refer to => [ Passenger Occupant Detection System ] Passenger Occupant Detection System
7 Wiring Harness
• Do not separate from the seat occupied recognition pressure sensor (G452) and seat occupied recognition control module (J706)
8 Front Passenger Seat Position Sensor (G554)
• Is a component of the electrical wiring harness - 7 -
• Removing and Installing, refer to => [ Seat Position Sensor G553/G554, with Seat Occupied Sensor for Passenger Airbag Deactivation ] Seat Position Sensor G553/G554, with Seat Occupied Sensor for Passenger Airbag Deactivation
9 Seat Occupied Recognition Control Module (J706)
• Depending on the version
• Removing and Installing, refer to => [ Passenger Occupant Detection System ] Passenger Occupant Detection System
Do not disconnect the electrical connector.
10 Bolt
• 3.5 Nm