Rear Sill Panel Trim

Rear Sill Panel Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Remove rear seat bench. Refer to => [ Rear Bench Seat ] Rear Bench Seat.

- Vehicles with individual power rear seat: Remove rear seat pan. Refer to => [ Rear Seat Pan ] Rear Seat Pan.

- Unclip sill panel strip - 1 - from the side member starting at the front using the trim removal wedge (3409) - arrow A -.

- Unclip the sill panel trim on the side panel - arrow B - and remove.

- Vehicles with ambient lighting: Disconnect the electrical harness connector for ambient lighting.

Installing

Install in reverse order of removal. Note the following:

- Engage the sill panel strip in the C-pillar trim and press it onto the side panel until it engages audibly.

- Stretch the door seal lip over.

Installation note: For example tightening specifications, replace components => [ Rear Sill Panel Trim Assembly Overview ] Rear Sill Panel Trim Assembly Overview.