Headlamp Range Control Module (J431)

Headlamp Range Control Module (J431)

- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided Functions" using the Vehicle Diagnostic Tester.

Removing






- Remove the luggage compartment rear trim panel..

- Release the spring - arrow - and remove the control module - 1 - from the frame.

- Disconnect the electrical connector - 2 -.

- To disconnect electrical connector, press catch - 1 -, turn retaining bracket in - direction of arrow - and remove connector.






Installing

Install in reverse order of removal, observing the following:

- Install the luggage compartment rear trim panel..