Power Rear Lid Opener Sensor (G750) Rear Lid Opener Sensor 2 (G760)

Power Rear Lid Opener Sensor (G750) Rear Lid Opener Sensor 2 (G760)

Removing






- Remove the rear spare wheel well.

- Disconnect the connector - 3 -.

- Remove the sensor - 2 - from the mount - 6 - and then cut through the cable tie - 5 -.

- Cut through the cable tie - 4 - to free up the sensor - 1 -.

- Remove the power rear lid opener sensor.

Installing

Install in reverse order of removal. Note the following:

- The rear lid opener sensor 2 (G760) must be mounted at the top of the bumper cover.

• How to recognize: Pin "4 and 5" at the connector.

- Install the rear spare wheel well.