Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2012 >> A8L Quattro Sedan (4H8) W12-6.3L (CEJA) >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Relay Carrier and Fuse Carrier, Passenger Compartment >> 7-Pin Relay/Fuse Panel

7-Pin Relay/Fuse Panel







7-Pin Relay/Fuse Panel

Removing






- Remove the driver side instrument panel cover..

- Remove the driver side knee airbag.

- Cut the cable tie, if equipped.

- Disconnect the connectors - 3, 4 and 5 -.

- Release the spring - 1 - and remove the relay/fuse panel - 2 - from the mount - arrow -.

- Open the clip and remove the auxiliary fuse panel - 2 -.






- Open the clips - arrows - and remove the relay - 1 - and the control modules from the relay panels.

- Release the retaining clips - arrows - and press the relay carrier - 3 - back and out of the bracket - 4 -.






- Open the clip - 2 - and remove the connector - 1 -.

• The exact assignment of the 7-pin relay/fuse panel can be found in the applicable wiring diagram.

Installing

Install in reverse order of removal. Note the following:

- Install the driver side knee airbag.

- Install the driver side instrument panel cover..

pro multis · About Operation CHARM