Coolant Pump Toothed Belt

Coolant Pump Toothed Belt

Special tools, testers and auxiliary items required

• Insert Tool 12 mm (T10360)

Removing

- Remove small coolant pipe. Refer to => [ Small Coolant Pipe ] Small Coolant Pipe.

- Remove the bolts - arrows - and remove the toothed belt guard.







The threads could be damaged.

• The drive gear bolt has a left thread.

- Remove the bolt on the coolant pump drive gear - 1 - clockwise - arrow - using the torque wrench (V.A.G 1331) and (T10360). Counterhold the vibration damper at the same time.






- Remove the drive gear - 1 - and toothed belt - 2 -.

Installing

• Tightening specifications, refer to => [ Coolant Pump and Thermostat Overview ] Coolant Pump and Thermostat Overview.

Installation is performed in the reverse order of removal, noting the following:

• Replace the drive gear bolt.

• Replace seals and O-rings.

• Note the toothed belt sprocket installation location => [ (Item 16) Toothed Belt Drive Gear ] Coolant Pump and Thermostat Overview.

- Install the small coolant pipe. Refer to => [ Small Coolant Pipe ] Small Coolant Pipe.

- Fill with coolant. Refer to => [ Filling ] Service and Repair.