Diagram 131/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fresh air blower control module, Compressor magnetic clutch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Locations

J126 - Fresh air blower control module Overview of Control Modules in interior of vehicle

J255 - Climatronic control module Overview of Control Modules in interior of vehicle

J604 - Auxiliary air heater control module Overview of Relay

N421 - Compressor magnetic clutch

N422 - Climatronic refrigerant shut-off valve A/C System Outside Pass Compartment

ST2 - Fuse panel 2

SD8 - Fuse 8 (on fuse panel D) Overview Of Fuses

SD10 - Fuse 10 (on fuse panel D) Overview Of Fuses

T2vz - Double connector, brown

T4j - 4-pin connector

T4k - 4-pin connector

T17b - 17-pin connector, blue Overview Of Connector Stations

T17q - 17-pin connector, red Overview Of Connector Stations

T20e - 20-pin connector Climatronic Control Module -J255-

V2 - Fresh air blower A/C Unit and Air Intake Housing Overview - Basic A/C System

(81) - Ground connection 1 (in instrument panel wiring harness)

(135) - Ground connection 2 (in instrument panel wiring harness)

(687) - Ground connection 1 on center tunnel Locations

(A227) - LIN bus connection 2 (in instrument panel wiring harness)

* - only for vehicles with Hybrid drive

*2 - Refer to applicable engine wiring diagram

*3 - Only for vehicles with a diesel engine

*4 - Only for vehicles with a 2.0L engine

*5 - Refer to applicable wiring diagram for fuse positions

Next Diagram 131/3 (Tracks 15-28)