Front Seat Belt Guide

Front Seat Belt Guide

• Removal and installation are same for right and left.

Removing






- Remove the B-pillar lower trim. Refer to => [ Lower B-Pillar Trim ] Lower B-Pillar Trim.

- Remove the bolts - 1 - and - 3 - and remove the front belt guide - 2 -.

Installation

Installation is reverse of removal, but note the following:

- Threaded holes for screws must be cleaned, for example, with thread cutter

- Replace the bolts each time they are removed.

- Make sure the belt does get pinches and is not damaged.

- Place the belt into the depression in the front belt guide - 2 -.

- Install the front belt guide centering pins into the holes in the B-pillar and tighten the screws - 1 - and - 3 -.

Tightening specifications, refer to => [ Front Three-Point Seat Belt Overview ] Front Three-Point Seat Belt Overview.