Right Catalytic Converter, With Manual Transmission

Right Catalytic Converter, with Manual Transmission

Removing






• The transmission is removed.

- Remove electrical connectors from bracket and disconnect:

2 For Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) (G130)
3 For Heated Oxygen Sensor (HO2S) (G39)

• Ignore - 1 and 4 -.

- Remove the catalytic converter.

Installing

Install in reverse order, paying attention to the following:

• Tightening specification, refer to => [ Muffler Overview ] Muffler Overview.

• Replace seals and self-locking nuts.