Removing and Installing/Replacing Intercom System Inside Speaker (Security)

65 95 ... - Removing and installing/replacing intercom system inside speaker (Security)





Necessary preliminary tasks:
- Remove "pedal assembly trim 51 45 185 Removing and Installing/Replacing Panel For Pedals"

Note:
Intercom system speaker is installed in pedal assembly trim.





Screw on threaded ring (1) in direction of arrow, disconnect cable, remove intercom system speaker (2).





When replacing pedal assembly trim:
Cut through insulating mat at line (1) and remove.





Drill opening (1) for intercom system speaker at marked point.
Dimension a = - 140 mm
Dimension b = - 100 mm
Dimension c = - dia. 38 mm





Installation:
Carry out function check of intercom system.