Remove and Installing Complete Night Vision Camera (Up To 03/07)

66 54 010 - Remove and installing complete night vision camera (up to 03/07)





Special tools required:
- 00 9 317 00 9 317 Trim Panel Wedge





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge)!





Necessary preliminary tasks:
- Remove front bumper trim 51 11 156 Removing and Installing Front Bumper Trim





Disconnect plug connection (1).

Disengage cable guide (2).





Gently lever out impact absorber (1) with special tool 00 9 317 00 9 317 Trim Panel Wedge.

Unscrew nuts (2).

Installation Note:
Make sure impact absorber (1) is correctly seated.

Tightening torque 66 54 1AZ [1][2]Forward Looking Camera.





Important!
Secure night vision camera (3) against falling down.

Release screw (1) and disengage tube (2) from mounting.

Tightening torque 66 54 1AZ [1][2]Forward Looking Camera.

Remove night vision camera (3) complete with holder.





Important!
Secure night vision camera (1) against falling down.

Disconnect hose connection (2) and unclip cable fastener (3).





After installation:

- Fill up with washer fluid
Replacement only:

- Replace night vision camera Replacing Night Vision Camera