Removing and Installing/Replacing Condenser for A/C System

64 53 551 - Removing and installing / replacing condenser for A / C system (N62)





Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant.
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil Instructions for Handling Refrigerant Oil (for Refrigerant R 134a).





Important!
Risk of damage!
Restart engine only when A/C system has been correctly filled.
Follow instructions Removal and Replacement for opening and replacing parts in refrigerant circuit.
If A/C system is opened for more than 24 hours:Replace desiccant insert for A/C system Replacing Desiccant Insert for A/C System (Condenser Removed)





Necessary preliminary tasks:
- Drawing off, evacuating and filling the A/C system Drawing off, Evacuating and Filling A/C System (R 134a) are not included in the time value given for this work operation
- Remove radiator cover Removing and Installing/Replacing Fan Cowl





Release screws (1).
Tightening torque 64 53 1AZ Condenser.
Disconnect suction and pressure lines (2) and lay to one side.
Lift out condenser.

Installation Note:
Replace sealing rings and moisten with refrigerant oil.





After installation:
- Evacuate and fill A/C system Drawing off, Evacuating and Filling A/C System (R 134a)