Replacing Rear Ride-Height Sensor

37 14 515 - Replacing rear left or right ride-height sensor





Important!
Observe safety instructions 00 .. ... Lifting Vehicle With A Lifting Platform for raising the vehicle.





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge)!





Disconnect plug connection (1).
Release nut (2) and disconnect jointed rod.
Tightening torque 37 14 7AZ Electric Components.
Release screws (4) and remove ride-height sensor.

Installation Note:
Sensor lever (3) must point outwards from ride-height sensor.
Tightening torque 37 14 6AZ Electric Components.





After installation:
- Version with ride-height control: Carry out ride-height-calibration Adjustments
- Check headlight adjustment Adjusting Headlights, correct if necessary