Replacing Valve on Hydraulic Unit
51 24 149 - Replacing valve on hydraulic unit
Necessary preliminary tasks:
- Remove hydraulic unit for rear lid actuation Removing and Installing/Replacing Hydraulic Unit for Rear Lid Actuation (Electrohydraulic-Fully Automatic)
Release screws (1).
Detach valve (2) from hydraulic unit (3).
Tightening torque 51 24 9AZ [1][2]Specifications.
Installation:
Sealing rings (1) on valve (2) must not be damaged.
Installation:
No dirt may enter bore (1) on hydraulic unit (2).
Check fluid level Notes on Automatic Rear Lid Actuation (Electrohydraulic-Fully Automatic).