Removing and Installing (Replacing) Safety Information Module

65 77 700 - Removing and installing (replacing) safety information module





Warning!
Note airbag safety instructions [1][2]Safety Regulations for Handling Components with Gas Generators!
Incorrect handling can activate airbag and cause injury.





Note:
Follow instructions for handling optical fibers 61 00 ... Notes on Handling Optical Fibers.





Necessary preliminary tasks:
- Disconnect and cover battery negative lead Instructions for Disconnecting and Connecting Battery.
- Remove trim for instrument panel, bottom right 51 45 181 Removing and Installing/Replacing Bottom Right Trim For Instrument Panel.





Unlock catch (1) in direction of arrow.
Pull safety information module (2) out of control unit carrier (3) slightly.
Unlock plug connections (4) and disconnect.
Remove safety information module (2).





Replacement:
Carry out coding/programming.
Observe following IDC specifications:
- Programming
- Coding
- Car & Key Memory
- CD "CIP"