Removing and Installing/Replacing Front Stabilizer
31 35 000 - Removing and installing/replacing front stabilizer
Important!
Observe safety instructions on raising the vehicle 00 .. ... Lifting Vehicle With A Lifting Platform.
Necessary preliminary tasks:
- Remove front assembly underside protection Removing and Installing/Replacing Front Underbody Protection
Release nut (1) on both sides; if necessary, grip at Torx socket.
Remove stabilizer link on both sides from stabilizer (3).
Installation Note:
Replace self-locking nut.
Tightening torque 31 35 12AZ Front Axle - Stabilizer Bar.
If necessary, remove holder for hydraulic lines from retaining bracket.
Release nuts (2) on both sides.
Remove stabilizer from front axle carrier.
Installation:
Check rubber mount on both sides Replacing Both Rubber Mounts of Stabilizer Mounting on Front Axle Carrier, replace if necessary.
Replace self-locking nuts.
Tightening torque 31 35 1AZ Front Axle - Stabilizer Bar.
Replacement:
Remove rubber mount on both sides from stabilizer Replacing Both Rubber Mounts of Stabilizer Mounting on Front Axle Carrier.