Replacing Solenoid Valve for Exhaust Side on VANOS Adjustment Unit

11 36 575 - Replacing solenoid valve for exhaust side on VANOS adjustment unit





Special tools required:
- 11 6 420 11 6 420 Socket wrench WAF32





Necessary preliminary tasks:
- Read out fault memory of DME control unit
- Check stored fault messages
- Switch off ignition
E85 only:
- Remove fluid tank for windshield washer system





Unlock plug (1) and remove.
Cut through cable tie (2).





Note:
Once it has been removed, oil drips from the solenoid valve.
Have a cleaning cloth ready.
Make sure no oil drips onto the belt drive. Remove any remnants of oil immediately with cleaning cloth.

Release solenoid valve with special tool 11 6 420 11 6 420 Socket wrench WAF32.

Installation:
Tightening torque 11 36 1AZ 11 36 Variable Camshaft Control VANOS.
Now clear the fault memory.