Removing and Installing/Replacing Camera for Lane Departure Warning

66 51 030 - Removing and installing/replacing camera for Lane Departure Warning





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Expand two-part mirror base cover (1) by pressing from below and detach.
Feed out two-part mirror base cover (1) and remove.

Note:
Catches of two-part mirror base cover (1) must not be damaged.





Slide camera (1) in direction of arrow out of mounting.
Disconnect plug connection (2).

Installation Note:
Make sure camera (1) is firmly seated in mounting.

Replacement:
Carry out calibration via BMW diagnosis system:
Service functions:
- Body

-
- - Lane Departure Warning

- Calibrate camera