Removing and Installing/Replacing Wiper Arm on Rear Window

61 62 030 - Removing and installing/replacing wiper arm on rear window





Fold up cover cap (1) in direction of arrow.
If necessary, spread internal mounts (2) as illustrated and remove cover cap (1).





Mounts (1) and catches (2) of cover cap (3) must not be damaged.





Raise rear window wiper arm (1).
Release nut (2) and remove rear window wiper arm (1).
If necessary, replace wiper blade.





Installation:
Wiper motor must be in end position.
Adjust dimension (A) between middle of rear window wiper arm and rear window edge.
Measurement (A): 30 mm.
Tighten nut to specified torque, tightening torque 61 62 5AZ 61 62 Tailgate Window Wiper.