Removing and Installing/Replacing Vent Hose (From 06/03) for Active Stabilizer (Front)

37 10 005 - Removing and installing / replacing vent hose (from 06/03) for active stabilizer (front)





Necessary preliminary tasks:
- Remove front assembly underside protection Removing and Installing/Replacing Front Underbody Protection





Do not release pressure relief valves (1) and (2). Pull vent hose (3) out of Y-piece at marked position (see arrow).
Vent line can be removed by sliding back the protruding collar on the Y-piece.





Unclip cover (1) and pull filter out of front axle carrier.
Expose vent hose (2) up to Y-distributor and remove.