51 16 210 - Removing and installing/replacing trim for preselector lever (from 03/07)

51 16 210 - Removing and installing/replacing trim for preselector lever (from 03/07)





Special tools required:
- 00 9 341





Version with automatic transmission:

Reach into trim (1) and unclip upwards from retainers (2).

Feed out trim (1) over preselector lever (3).





Installation:
Make sure retainers (1) are correctly seated in associated mountings of trim (2).





Version with automatic sport transmission:

Lever out gaiter (1) from catches (2) with special tool 00 9 341.





Reach into trim (1) and unclip upwards from retainers (2).

Feed out trim (1) upwards over gaiter (3), disconnect associated plug connection and remove trim (1).





Installation:
Make sure retainers (1) are correctly seated in associated mountings of trim (2).

Replacement:

If necessary, remove driving dynamics switch Service and Repair.