Engine Accessory Drive Seal: Service and Repair

11 14 010 - Replacing sealing cover for vacuum pump (N54)





Special tools required:
- 11 8 531 11 8 530 Removal and Installation Tool
- 11 8 532 11 8 530 Removal and Installation Tool
- 11 8 533 11 8 530 Removal and Installation Tool
- 11 8 534 11 8 530 Removal and Installation Tool
- 11 8 535 11 8 530 Removal and Installation Tool
- 11 8 537 11 8 530 Removal and Installation Tool





Necessary preliminary tasks:
- Remove fan cowl
- Remove alternator drive belt Service and Repair
- Remove both drive belt tensioners Service and Repair





Note:
For purposes of clarity, illustrations show alternator and power steering pump removed.

Secure special tool 11 8 535 11 8 530 Removal and Installation Tool with special tools 11 8 531 11 8 530 Removal and Installation Tool and 11 8 537 11 8 530 Removal and Installation Tool.





Position special tool 11 8 537 11 8 530 Removal and Installation Tool by hand on sealing cover.
Screw in special tool 11 8 534 11 8 530 Removal and Installation Tool.

Note:
The sealing cover is pressed out diagonally during this work step





Screw in new sealing cover (1) with special tools 11 8 532 11 8 530 Removal and Installation Tool and 11 8 533 11 8 530 Removal and Installation Tool until flush with crankcase upper section.





Assemble engine.