11 00 ... Removing and Installing/Replacing Front Ignition Coil Cover

11 00 - Removing and installing/replacing front ignition coil cover (N54)





Release screws (see arrows).
Tightening torque 11 12 7AZ 11 12 Cylinder Head with Cover.
Raise front ignition coil cover (1) approx. 5 - 10 cm.





Carefully release connections for vacuum lines (1 and 2).

Installation:
Connections (1 and 2) must snap audibly into place!

Remove ignition coil cover.

Note:
When working on cylinder no. 6, also remove the rear ignition coil cover 11 00 ... Removing and Installing/Replacing Rear Ignition Coil Cover.