65 77 720 Removing and Installing/Replacing Left B-pillar Sensor

65 77 720 - Removing and installing (replacing) left B-pillar sensor





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Warning!
Note airbag safety instructions! Service Precautions
Incorrect handling can activate airbag and cause injury.





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead and cover
- Remove trim panel for door pillar (bottom) 51 43 150 Removing and Installing or Replacing Trim For Left or Right Door Pillar (Bottom)





Release screw (1).
Loosen screw (2).

Installation Note:
Tightening torque 65 77 5AZ 65 77 Airbag Triggering Control.

If necessary, remove B-pillar sound insulation (5).

Raise B-pillar sensor (3) slightly through opening in B-pillar and feed out towards rear.
Unfasten plug connection (4) and disconnect.
Remove B-pillar sensor (3) from B-pillar.






Installation Note:
Establish correct positioning of B-pillar sensor (1) by means of guide pin (2) and screw (3).