83. Engine Front Cover Assemble

Engine Front Cover Assemble

^ Tools Required
- EN 46103Camshaft Actuator Valve Seal Remover/Installer
- J 29184 Output Shaft Seal Installer






Important: Do not lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.

1. Install the NEW crankshaft front oil seal into the engine front cover using the J 29184.





2. Install the NEW camshaft position actuator valve oil seals into the engine front cover using the EN 46103.