Symptoms - Power Outlets

Symptoms - Power Outlets

Important: The following steps must be completed before using the symptom tables.

1. Before using the symptom diagnostic table, perform the Diagnostic System Check - Vehicle, in order to verify the following conditions:

* There are no DTCs set.
* The module can communicate via the serial data link. Initial Inspection and Diagnostic Overview

2. Review the system operation in order to understand the system functions. Refer to Power Outlets Description and Operation.

Visual/Physical Inspection

* Inspect for aftermarket devices which can affect the operation of the cruise control system.
* Inspect the accessible system components or the visible system components for obvious damage or for obvious conditions which can cause the symptom.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections. Component Tests and General Diagnostics

Symptom List

Refer to Power Outlet Receptacle Inoperative (120 VAC) in order to diagnose the system.