SC9K-7 Trunk Lid Release Available W/Ignition Switch In "RUN"

TRUNK LID RELEASE AVAILABLE WITH IGNITION SWITCH IN "RUN" AND TRANSMISSION OUT OF "PARK"

SC9K-7:

Circuit Description

When the keyless entry receiver senses no voltage on CKT 39 and CKT 275, the trunk lid release function can be activated using the transmitter. When the keyless-entry receiver senses voltage on CKT 39 and CKT 275, (ignition switch in "RUN" and transmission in "PARK") the trunk lid release function can also be activated using the transmitter. When the keyless entry receiver senses voltage on CKT 39 (ignition switch in "RUN") and no voltage on CKT 275 (transmission not in "PARK") the trunk lid release function cannot be activated by the transmitter.

Test Description

Number(s) below refer to circled number(s) on the diagnostic chart.

1. Check for an ignition input signal to the keyless entry receiver.
2. Check for a false signal from the transmission position switch or short to voltage on CKT 275.

Diagnostic Aids

If voltage is absent at terminal "B" of keyless entry blue connector (with IGN "ON") and transmission is out of "PARK," trunk lid release will be available using the remote keyless transmitter.