DTC 32

DTC 32 Lateral Accelerator Switch Error - Part 1 Of 2:

DTC 32 Lateral Accelerator Switch Error - Part 2 Of 2:

CONDITIONS FOR SETTING THE DTC
The Control Module will monitor the lateral accelerator switch signal for invalid voltage levels. A lateral accelerator switch error occurs when the lateral accelerator switch signal is short circuited to B+ or ground, or the lateral accelerator switch is open-circuited or disconnected. Recovery occurs upon detection of valid lateral accelerator switch input voltage.

ACTION TAKEN WHEN THE DTC SETS
1. Record lateral accelerator switch error.
2. Turn on both driver select switch L.E.D.s.
3. Disable lateral accelerator switch input until valid voltage level is detected.