Exhaust Crossover Installation

1. Install the exhaust crossover.
2. Install the exhaust crossover studs to the right exhaust manifold.
Tighten the studs to 20 Nm (15 ft. lbs.).

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the exhaust crossover bolts to the left exhaust manifold.
Tighten the bolts to 20 Nm (15 ft. lbs.).





4. Install the exhaust crossover heat shield.
5. Install the exhaust crossover heat shield nuts.
Tighten the nuts to 20 Nm (15 ft. lbs.).