Hood Primary Latch Release Cable Handle Replacement

Hood Primary Latch Release Cable Handle Replacement

Removal Procedure




1. Remove the instrument panel insulator. Refer to Instrument Panel Insulator Replacement (LH) (Instrument Panel (IP) - Insulator Replacement - Left)Instrument Panel Insulator Replacement (RH) (Instrument Panel (IP) - Insulator Replacement - Right)
2. Remove the hood latch release handle bolts.




3. Remove the hood release cable from the hood release handle.
4. Remove the hood release handle from the instrument panel.

Installation Procedure




1. Install the hood release cable to the hood release handle.




2. Install the hood release handle to the instrument panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the hood latch release handle bolts.

Tighten the hood latch release handle bolts to 2 Nm (18 lb in).

4. Install the instrument panel insulator. Refer to Instrument Panel Insulator Replacement (LH) (Instrument Panel (IP) - Insulator Replacement - Left)Instrument Panel Insulator Replacement (RH) (Instrument Panel (IP) - Insulator Replacement - Right)