Center Pillar Upper Trim Panel Replacement

Center Pillar Upper Trim Panel Replacement

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure

1. Open the upper seat belt upper guide loop attachment cover.
2. Remove the upper seat belt guide loop attachment nut.
3. Remove the upper seat belt guide loop attachment from the adjuster bracket.




4. Starting with the top retainer use J 38778 to remove the upper trim panel from the center pillar.

Installation Procedure




1. Install the upper trim panel to the center pillar.
2. Push firmly on the upper trim panel in order to seat the retainers.
3. Install the upper seat belt upper guide loop attachment to the adjuster bracket.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the upper seat belt guide loop attachment nut.

Tighten the nut to 42 Nm (31 lb ft).