Exhaust Crossover Pipe: Service and Repair

Removal Procedure





1. Remove the throttle body air inlet duct.
2. Remove the exhaust crossover heat shield bolts.
3. Remove the exhaust crossover heat shield.





4. Remove the exhaust crossover pipe bolts.
5. Remove the exhaust crossover pipe.

Installation Procedure





1. Install the exhaust crossover pipe.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the exhaust crossover pipe bolts.
Tighten the exhaust crossover pipe bolts to 25 Nm (18 ft. lbs.).





3. Install the exhaust crossover heat shield.
4. Install the exhaust crossover heat shield bolts.
Tighten the exhaust crossover heat shield bolts to 10 Nm (89 inch lbs.).
5. Install the throttle body air inlet duct.