Front Seat Adjuster Replacement (Up to VIN 2G4W5525711252272)

Front Seat Adjuster Replacement (Up to VIN 2G4W5525711252272)

Removal Procedure

1. Remove the front seat from the vehicle.

1. For the bucket seat, refer to Bucket Seat Replacement (Bucket Seat Replacement) .
2. For the split bench, refer to Split Bench Seat Replacement (Split Bench Seat Replacement) .

2. Remove the front seat riser trim cover. Refer to Power Seat Riser Trim Cover Replacement.




3. Remove the seat belt buckle nut. Remove the seat belt from the vehicle.
4. Remove the J-hooks holding the cushion trim cover to the seat frame.
5. Position the seat back all the way down.




6. Lift up on the cushion trim cover and pad to access the seat frame to seat adjuster bolts.
7. Remove the seat frame to adjuster bolts.
8. Remove the seat adjuster from the seat frame.
9. If power, remove the front seat adjuster motor assembly from the front seat adjuster. Refer toSeat Adjuster Motor Replacement (Power Seat Motor) .



Installation Procedure

1. Install the front seat adjuster motor assembly to the front seat adjuster. Refer to Seat Adjuster Motor Replacement (Power Seat Motor)




2. Position the seat adjuster to the seat frame.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the seat frame bolts.

Tighten the seat frame bolts to 25 N.m (18 lb in).

4. Position the seat back to the upright position.
5. Install the seat cover J-retainers.




6. Install the seat belt nut.

Tighten the nut to 42 N.m (31 lb ft).

7. Install the seat riser trim cover.
8. Install the seat to the vehicle.

1. For the bucket seat, refer to Bucket Seat Replacement (Bucket Seat Replacement) .
2. For the split bench, refer to Split Bench Seat Replacement (Split Bench Seat Replacement) .