Hood Shock / Support: Service and Repair

Assist Rod Replacement - Hood

Removal Procedure






Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

1. Open and support the hood.
2. Lift the retainer clips on the assist rod using a small flat-bladed tool.





Notice: Refer to Liftgate/Hood Assist Rod Notice in Cautions and Notices.

3. Pull the upper end of the assist rod from the ball joint on the hood.
4. Pull the lower end of the assist rod from the ball joint on the lower hood hinge.



Installation Procedure






Notice: Refer to Liftgate/Hood Assist Rod Notice in Cautions and Notices.

1. Press the upper end of the assist rods onto the ball joint on the hood.




2. Press the lower end of the assist rods onto the ball joint on the lower hood hinge
3. Remove the support from the hood.
4. Close the hood.