Trim Panel Replacement - Rear Quarter Upper

Trim Panel Replacement - Rear Quarter Upper

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover


Removal Procedure





1. Remove the rear seat back. Refer to Seat Back Replacement - Rear (Non-folding) (Seat Back Replacement - Rear (Non-folding))Seat Back Replacement - Rear (Folding) (Seat Back Replacement - Rear (Folding)) .
2. Remove the door weatherstrip from the pinch weld flange to expose the upper quarter trim panel.
3. Use J 38778 to disengage the push-in retainers and remove the trim panel.



Installation Procedure





1. Position the upper quarter trim panel into place.
2. Install the push-in retainers to secure the trim panel.
3. Install the door weatherstrip onto the pinch weld flange.
4. Install the rear seat back. Refer to Seat Back Replacement - Rear (Non-folding) (Seat Back Replacement - Rear (Non-folding))Seat Back Replacement - Rear (Folding) (Seat Back Replacement - Rear (Folding)) .