A Important Preliminary Checks

Before using the Symptom tables use the following:
^ Perform Diagnostic System Check - Computers and Controls Systems and verify all of the following items:
- Ensure that no DTCs are stored.
- Scan tool data is within normal operating range. Refer to Scan Tool Data List. Scan Tool Data, Normal Values and Definitions
^ Verify the customer complaint.
^ Perform the visual/physical Check. Initial Inspection and Diagnostic Overview

Locate the correct symptom in the list at the end. Follow the procedure in the appropriate diagnostic table. If the condition can not be duplicated, or is determined to be intermittent refer to intermittent Conditions. Intermittent Conditions